Agility® Telemetry Radio (ATR)

atr-radioThe Agility® Telemetry Radio (ATR) includes 2 models that offer user-configurable data rates, channel bandwidths and operating frequency. The ATR is supplied with a VHF or UHF RF Module and operates on any channel within the approved bands. A wide variety of applications are supported including SCADA, Video Surveillance and Voice over IP. The radio may be used to create Point-to-Point (PTP), Point-to-Multipoint (PTM) or simplex (one-way) networks with priority routing support for voice, compressed video and SCADA traffic. Ethernet and RS-232 interfaces are available. The ATR operates in both licensed and secondary-use spectrum. Local and remote network management is provided through a local TCP IP connection or over the air. Management is provided through a PC-based Element Management System provided by KTS.

Features:

  • Data Rate, Channel Size and Frequency Agile
  • Channel Sizes from 6.25 to 175 KHz
  • Agile RF Modules
  • VHF: 150-174 MHz and 217-220 MHz
  • UHF: 450-512 MHz
  • Data Rates from 2.4 to 68 kbps
  • FIPS 140-2 validated cryptography
  • Optional wireless link encryption
  • Up to 37 dBm transmit RF power
  • FCC Part 15 and 90 compliant and ETSI 300-113-1 pending
  • Ethernet Port with bridging
  • RS-232 Serial Port
  • Software upgradable (Local or over-the-air)
  • Modulation: 2-FSK and 4-FSK

The Ethernet port functions as a bridge for IP subnets via the wireless link The ATR is available with an optional, custom Daughterboard. Contact KTS for applications and capabilities.

Specifications:

Electrical
RF Module frequency bands (factory selectable)
VHF ATR-US-V-100
UHF ATR-US-U-100
RF Transmit Power 10 to 37 dBm
Noise Figure 4 dB
Security FIPS-140-2 Validated
Spurious & Harmonic Emissions FCC Part 15 & 90 compliant
Data Rates 2.4 to 68 kb/s, SW configurable
Modulation 2-FSK, 4-FSK
Channel Bandwidths 6.25, 12.5, 25, and 50 kHz
Frequency Selection 6.25 kHz steps
Selectivity >80 dB
Operating mode Half-duplex or simplex
User Ports RS-232 (DCE); Ethernet (10/100 BT)
Mechanical
Dimensions 3.75” x 5.0” x 1.5”
Enclosure material AL, TCP coating
Weight (wall mount) 1.2 lb
Mounting Universal Wall w/Fan, DIN Rail
Environmental
Operating Temperature Range -30 to 60 C
Operating Humidity Up to 95%, non-condensing
Power
Input Voltage 9-24 VDC
Current 0.5 A (RX), 2.5 A (Tx)
Connector/Fan Terminal block

Available for shipment TODAY Order NOW 1-877-220-6114 Specifications subject to change without notice *FCC and ETSI Approval pending

I need more information – Connect me with a KTS Representative